Matric Part 1/9th Class Physics Chapter 4 Short Question Test With Answer for Unit 4 Turning Effect of Forces

Online Short Questions For Chapter 4 "9th Class Physics English Medium Chapter 4 Preparation "

Try The Short Questions For 9th Class Physics English Medium Chapter 4 Preparation

  • Total Questions10

  • Available Sets12

Physics (New Book) - 9th Class Physics English Medium Chapter 4 Preparation

Question # 1

Define rigid body and give an example

  • Ans 1: Rigid Body: A body is composed of large number of particles. It the distance between all pairs of particles of the body do not change by applying a force, then it is called a rigid body
  • Ans 2: Example: A door, A cylinder
Submit

Prepare Complete Set Wise Questions For Chapter 4 "9th Class Physics English Medium Chapter 4 Preparation "

9th Class Physics English Medium Chapter 4 Preparation - Set 1

Question # 1

Define rigid body and give an example

  • Ans 1: Rigid Body: A body is composed of large number of particles. It the distance between all pairs of particles of the body do not change by applying a force, then it is called a rigid body
  • Ans 2: Example: A door, A cylinder
Submit

9th Class Physics English Medium Chapter 4 Preparation - Set 2

Question # 1

At which point an applied force does not produce rotation

  • Ans 1: A force applied at the centre of mass of a body does not produce any rotation rather the body moves in the direction of applied force
Submit

9th Class Physics English Medium Chapter 4 Preparation - Set 3

Question # 1

How can we increase the stability of a vehicle

  • Ans 1: Stability of the vehicle can be increased by lowering the centre of mass of vehicle and by making them heavy at the bottom.
Submit

9th Class Physics English Medium Chapter 4 Preparation - Set 4

Question # 1

A ladder leaning at a wall as shown in figure is in equilibrium how

  • Ans 1: The weight of ladder produces anticlock wise torque. The wall pushes the ladder at its tope end thus produce a clockwise torque. Both torques are equal and opposite and cancel their effect. So, the ladder is in state of equilibrium.
Submit

9th Class Physics English Medium Chapter 4 Preparation - Set 5

Question # 1

How a force can be resolved into its prependicular components

  • Ans 1: To resolve a force into its perpendicular components we neend head to tail rule. It the given forces is considered as resultant force then the two components can be drawn In the figure force F is making an angle 0 with horizontal surface and it is resolved into Fx and Fy which are horizontal and vertical components respectively.
Submit

9th Class Physics English Medium Chapter 4 Preparation - Set 6

Question # 1

In a right angled triangle length of base is 4cm and its perpendicular is 3cm.

  • Ans 1: length of its hypotenuse, cos , sin, tan,
Submit

9th Class Physics English Medium Chapter 4 Preparation - Set 7

Question # 1

On which factor torque depends

  • Ans 1: So, torque depends upon force and moment arm
Submit

9th Class Physics English Medium Chapter 4 Preparation - Set 8

Question # 1

Define couple arm

  • Ans 1: The perpendicular distance between two force of couple is called couple arm
Submit

9th Class Physics English Medium Chapter 4 Preparation - Set 9

Question # 1

A force of 150 N is making an angle of 40 with horizontal surface what is its vertical components.

  • Ans 1: Given data: Give data F= 15N
    0=40

  • Ans 2: Required Fy
Submit

9th Class Physics English Medium Chapter 4 Preparation - Set 10

Question # 1

When a body is said to be in equilibrium

  • Ans 1: A body is said to be in equilibrium if no net force acts on it.
Submit

9th Class Physics English Medium Chapter 4 Preparation - Set 11

Question # 1

Differentiate between clockwise and anti-clockwise moment

  • Ans 1: Clockwise Moment: The force that trrns a spanner in the clockwise direction is known is clockwise force. The torque or moment of force produced to this force is called clockwise moment
    The moment produced during tighten a nut
  • Ans 2: Anti-Clockwise moment: The force that turns a spanner in the anticlockwise direction is called known as anticlockwise force. The torque or moment of force is called anticlockwise moment
    The moment produced during loosing a nut
Submit

9th Class Physics English Medium Chapter 4 Preparation - Set 12

Question # 1

What is meant by graph

  • Ans 1: A graph is a diagram showing the relationship between variable quantities typically of two variables, each measured along a pair of axis at right angle.
Submit

4th Unit

9th class Physics Chapter 4 (English Medium)

Here you can prepare 9th Physics Chapter 4 online Short Questions Preparation (Turning Effect of Forces). Click the button for 100% free full Preparation.

Is this page helpful?

Share your comments & questions here

Guest
  • No comments yet. Be the first to comment!