More Classes
5th Class
6th Class
7th Class
8th Class
9th Class
10th Class
11th Class
12th Class
NAT I
NAT II
CSS
IQ
General Knowledge
MDCAT
ECAT
GAT General
GAT Subject
Other Links
Go to Home
Online Tests
PPSC Physics Chapter 6 Electricity and Magnetism MCQs With Answers
Question # 1
The Step up transformer
Choose an answer
Increase the input current
Increases the input voltage
Has more turns in the primary coil
Has less time in the secondary coil
Previous
Skip
Next
Question # 2
In a simple D.C. motor the direction of current in the motor is reversed every half revolution to keep the motor turning in the same direction which part of the motor does this.
Choose an answer
Brushes
Coil
Commutator
Poles
Previous
Skip
Next
Question # 3
Capacitance is directly proportional to
Choose an answer
Distance between the plates
Di electric strength
Area of the plates
Charge multiplied by the applied voltage
Previous
Skip
Next
Question # 4
The ratio of the rms value of the applied voltage to the rms value of resulting A.C. is called.
Choose an answer
Reluctance
Impedance
Reactance
Resistance
Previous
Skip
Next
Question # 5
A step up transformer has a turn ratio of 1:100 A voltage of 20 V is connected across the primary coil What is the secondary voltage.
Choose an answer
0.2 V
5 V
100 V
2000 V
Previous
Skip
Next
Question # 6
A charged particles moving in a magnetic field experiences a resultant force.
Choose an answer
Proportional to its K.E.
In the direction of the field
In the direction opposite to its motion
In the direction perpendicular to both the field and its motion
Previous
Skip
Next
Question # 7
The device in the circuit that consume electrical energy are known as.
Choose an answer
Resistors
Capacitors
Fuses
Load
Previous
Skip
Next
Question # 8
In an induction coil, the secondary emf is.
Choose an answer
Zero at the break of the circuit
Zero during make of the circuit
Very high during make of the circuit.
Very high during break of the circuit
Previous
Skip
Next
Question # 9
The SI unit of mutual induction a
Choose an answer
Vs-1 A-1
V m -1 A-1
Henry
Tesla
Previous
Skip
Next
Question # 10
An important application of the semi conductor is the
Choose an answer
Vacuum tube
Fluroescent tube
Copper oxide rectifier
Battery
Previous
Skip
Next
Question # 11
Which of the following material could be used for a high vacuum, high voltage tube.
Choose an answer
Thoriated tungsten
Tungsten
Copper
Cesium
Previous
Skip
Next
Question # 12
At which temperature a ferromagnetic material becomes paramagnetic on healing.
Choose an answer
Kelvin temperature
Celsius temperature
Curie temperature
Fahrenheit temperature
Previous
Skip
Next
Question # 13
On which factor the self induction does not depends upon.
Choose an answer
Number of turns of the coil
the core material
Weight of the coil
Area of the cross section of the coil
Previous
Skip
Next
Question # 14
What does a dynamo generate
Choose an answer
Electrons
Emf
anion
Cation
Previous
Skip
Next
Question # 15
If the current in a wire which is placed perpendicular to a magnetic fields increases the force on the wire.
Choose an answer
Increases
Decreases
Remain the same
Will be zero
Previous
Skip
Next
Question # 16
A bulb of 100 W is connected to a 160 V supply What will be the power consumed.
Choose an answer
25 W
30 W
50 W
64 W
Previous
Skip
Next
Question # 17
A plug connoted to a table lamp contains a 3 A fuse Why is the fuse needed.
Choose an answer
To increase the resistance of the circuit
To make it easier for the current to flow
To protect the wiring form overheating
To reduce the voltage across thelamp
Previous
Skip
Next
Question # 18
The field inside a hollow spherical conductor is.
Choose an answer
Constantin zero
Constant but not necessarily zero
A function of charge on sphere
a function of distance from the centre
Previous
Skip
Next
Question # 19
If the number of coulombs per second through a wire of 10 Ohm resistance across a 120 V line is 12, the current is
Choose an answer
5 A
10 A
12 A
15 A
Previous
Skip
Next
Question # 20
Electrical energy is transmitted at high alternating voltages which of the following is not a valid reason for doing this.
Choose an answer
At high voltage a.c is safer than d.c.
For a given powers, there is lower current with higher voltage.
There is a smaller energy loss at high voltage and lower current
The transmission lines can be thinner with a lower current.
Previous
Skip
Next
Question # 21
The magnetic field inside a solenoid is
Choose an answer
Zero
Infinite
Uniform
Non uniform
Previous
Skip
Next
Back