ECAT Pre General Science Online Test MCQs With Answers

An inkjet printer uses in its operation:

An induced current can be produced by:

Right now, I am looking at a shelf full or relics, a collection of has-beens, old-timers, antiques, fossils. Right now I am lolling at a shelf full of books. Yes that’s right. If you have some spare cash (the doing rate is about $89) and are looking to enhance your reading experience, then I highly suggest you consider purchasing an e-reader. E-readers are replacing the books of old, and I welcome them with open arms (as you should).

If you haven’t heard of an e-reader and don’t know what it is, then please permit the following explanation. An e-reader is a device that allows you to read e-books. An e-book is a book-length publication in digital form, consisting of text, images, or both, and produced on, published through, and readable on computers or other electronic devices. Sometimes the equivalent of a conventional printed book, e-books can also be born digital. The Oxford Dictionary or English defines the e-book as “an electronic version of a printed book, “but e-book can and do exist without any printed equivalent.

So now you know what an e-reader is. But you still may be wondering why they put printed books to shame. E-readers are superior to printed books because they save space, are environmentally friendly, and provide helpful reading tips and tools that printed books do not.

E-readers are superior to printed books because they save space. The average e-reader can store thousands of digital book, providing a veritable library at your fingertips. What is more, being the size and weight of a thin hardback, the e-reader itself is relatively petite. It is easy to hold and can fit in a pocketbook or briefcase easily. This makes handling ponderous behemoths such as War and Peace, Anna Karenina, and Les Miserables a breeze. Perhaps the only drawback to the space-saving aspect of an e-reader is that it requires you to find new things to put on your shelves.

In addition, e-readers are superior to books because they are environmentally friendly. The average novel is about 300 pages long. So, if a novel is printed 1000 times, it will use 300,000 pieces of paper. That’s a lot of paper! If there are about 80,000 pieces of paper in a tree, this means it takes almost 4 trees to make these 1000 books. Now, we know that the average bestseller sells about 20,000 copies per week. That means that it takes over 300 trees each month to sustain this rate. And for the super bestsellers, these figures increase dramatically. For example, the Harry Potter book series has sold over 450 million copies. That’s about 2 million trees! Upon viewing these figures, it is not hard to grasp the severe impact of printed books on the environment. Since e-reader use no trees, they represent a significant amount of preservation in terms of the environment and its resources.

Finally, e-reader are superior to books because they provide helpful reading tips and tolls that printed books do not. The typical e-reader allows its user to customize letter size, font, and line spacing. It also allows highlighting and electronic bookmarking. Furthermore, it grants users the ability to get an overview of a book and then jump to a specific electronic bookmarking. Furthermore, it grants users the ability to get an overview of a book and then jump to a specific location based on that overview. While these are all nice features, perhaps the most helpful of all is the ability to get dictionary definitions at the touch of a finger. On even the most basic e-reader, users can conjure instant definitions without having to hunt through a physical dictionary.

It can be seen that e-readers are superior to printed books. They save space, are environmentally friendly, and provide helpful reading tips and tools that printed books do not. So what good are printed books? Well, they certainly make nice decorations.

Based on information in the passage, it can be inferred that War and Peace, Anna Karenina, and Les Miserables are all

Right now, I am looking at a shelf full or relics, a collection of has-beens, old-timers, antiques, fossils. Right now I am lolling at a shelf full of books. Yes that’s right. If you have some spare cash (the doing rate is about $89) and are looking to enhance your reading experience, then I highly suggest you consider purchasing an e-reader. E-readers are replacing the books of old, and I welcome them with open arms (as you should).

If you haven’t heard of an e-reader and don’t know what it is, then please permit the following explanation. An e-reader is a device that allows you to read e-books. An e-book is a book-length publication in digital form, consisting of text, images, or both, and produced on, published through, and readable on computers or other electronic devices. Sometimes the equivalent of a conventional printed book, e-books can also be born digital. The Oxford Dictionary or English defines the e-book as “an electronic version of a printed book, “but e-book can and do exist without any printed equivalent.

So now you know what an e-reader is. But you still may be wondering why they put printed books to shame. E-readers are superior to printed books because they save space, are environmentally friendly, and provide helpful reading tips and tools that printed books do not.

E-readers are superior to printed books because they save space. The average e-reader can store thousands of digital book, providing a veritable library at your fingertips. What is more, being the size and weight of a thin hardback, the e-reader itself is relatively petite. It is easy to hold and can fit in a pocketbook or briefcase easily. This makes handling ponderous behemoths such as War and Peace, Anna Karenina, and Les Miserables a breeze. Perhaps the only drawback to the space-saving aspect of an e-reader is that it requires you to find new things to put on your shelves.

In addition, e-readers are superior to books because they are environmentally friendly. The average novel is about 300 pages long. So, if a novel is printed 1000 times, it will use 300,000 pieces of paper. That’s a lot of paper! If there are about 80,000 pieces of paper in a tree, this means it takes almost 4 trees to make these 1000 books. Now, we know that the average bestseller sells about 20,000 copies per week. That means that it takes over 300 trees each month to sustain this rate. And for the super bestsellers, these figures increase dramatically. For example, the Harry Potter book series has sold over 450 million copies. That’s about 2 million trees! Upon viewing these figures, it is not hard to grasp the severe impact of printed books on the environment. Since e-reader use no trees, they represent a significant amount of preservation in terms of the environment and its resources.

Finally, e-reader are superior to books because they provide helpful reading tips and tolls that printed books do not. The typical e-reader allows its user to customize letter size, font, and line spacing. It also allows highlighting and electronic bookmarking. Furthermore, it grants users the ability to get an overview of a book and then jump to a specific electronic bookmarking. Furthermore, it grants users the ability to get an overview of a book and then jump to a specific location based on that overview. While these are all nice features, perhaps the most helpful of all is the ability to get dictionary definitions at the touch of a finger. On even the most basic e-reader, users can conjure instant definitions without having to hunt through a physical dictionary.

It can be seen that e-readers are superior to printed books. They save space, are environmentally friendly, and provide helpful reading tips and tools that printed books do not. So what good are printed books? Well, they certainly make nice decorations.

As used in paragraph 5, which is the best synonym for ‘sustain’?

The public distribution system, which provides food at low prices, is a subject of vital concern. There is a growing realization that thought Pakistan has enough food to feed its masses three square meals a day, the monster of starvation and food insecurity continues to haunt the poor in our country.

Increasing the purchasing power of the poor through providing productive employment leading to rising income, and thus good standard of living is the ultimate objective of public policy. However, till then, there is a need to provide assured supply of food through a restructured more efficient and decentralized public distribution system (PDS).

Although the PDS is extensive – it is one of the largest such systems in the world – it has yet to reach the rural poor and the far off places. It remains an urban phenomenon, with the majority of the rural poor still out of its reach due to lack of economic and physical access. The poorest in the cities and the migrants are left out, for they generally do not possess ration cards. The allocation of PDS supplies in big cities is larger than in rural areas. In view of such deficiencies in the system, the PDS urgently needs to be streamlined. In addition, considering the large food grains production combined with food subsidy on one hand and the continuing slow starvation and dismal poverty of the rural population on the other, there is a strong case for making PDS target group oriented.

The growing salaried class is provided job security, regular income, and percent insulation against inflation. These gains of development have not percolated down to the vast majority of our working population. If one compares only dearness allowance to the employees in public and private sector and looks at its growth in the past few years, the rising food subsidy is insignificant to the point of inequity. The food subsidy is a kind of D.A. to the poor, the self-employed and those in the unorganized sector of the economy. However, what is most unfortunate is that out of the large budget of the so – called food subsidy, the major part of it is administrative cost and wastages. A small portion of the above budget goes to the real consumer and an even lesser portion to the poor who are in real need.

It is true that subsidies should not become a permanent feature except for the destitute, disabled widows and the old. It is also true that subsidies often create a psychology of dependence and hence is habit – forming, killing the general initiative of the people. By making PDS target group oriented, not only the poorest and neediest would be reached without additional cost, but it will actually cut overall costs incurred on large cities and for better off localities. When the food and food subsidy are limited the rural and urban poor should have the priority in the PDS supplies. The PDS should be closely linked with programs of employment generation and nutrition improvement.

Which of the following, according to the passage, it compared with dearness allowance?

It is easy to make delicious-looking hamburger at home. But would this hamburger still look delicious after it sat on your kitchen table under very bright lights for six or seven hours? if someone took a picture or made a video of this hamburger after the seventh hour, would anyone want to eat it? More importantly, do you think you could get millions of people to pay money for this hamburger? These are the questions that fast food companies worry about when they produce commercials or print ads for their products. Video and photo shoots often last many hours. The lights that the photographers use can be extremely hot. These conditions can cause the food to look quite unappealing to potential consumers. Because of this, the menu items that you see in fast food commercials are probably not actually edible.Let's use the hamburger as an example. The first step towards building the commercial hamburger is the bun. The food stylist--a person employed by the company to make sure the products look perfect--sorts through hundreds of buns until he or she finds one with no wrinkles. Next, the stylist carefully rearranges the sesame seeds on the bun using glue and tweezers for maximum visual appeal. The bun is then sprayed with a waterproofing solution so that it will no get soggy from contact with other ingredients, the lights, or the humidity in the room.Next, the food stylist shapes a meat patty into a perfect circle. Only the outside of the meat gets cooked-the inside is left raw so that the meat remains moist. The food stylist then paints the outside of the meat patty with a mixture of oil, molasses, and brown food coloring. Grill marks are either painted on or seared into the meat using hot metal skewers.Finally, the food stylist searches through dozens of tomatoes and heads of lettuce to find the best-looking produce.One leaf of the crispest lettuce and one center slice of the reddest tomato are selected and then sprayed with glycerin to keep them looking fresh. So the next time you see a delectable hamburger in a fast food commercial, remember: you are actually looking at glue, paint, raw meat , and glycerin. Are you still hungry?

Question:

What is the best synonym for ' delectable'?

Paul’s wife knows Paul loves to read cookbooks. She decides to get him one for his birthday. Paul tells her he will try to make a new recipe for three days in a row. On Monday, Paul makes blueberry pancakes for breakfast. He gets the blueberries from the farmers’ market. On Tuesday, Paul makes beef soup for dinner. He puts in cubes of beef, carrots, and onions. The recipe calls for cream, but Paul does not cream. He uses water instead. On Wednesday, Paul makes a tomato salad with cucumbers and onions. He picks the cucumbers and tomatoes from his garden. He likes this dish best. It was also the easiest for him to make.

What does Paul get cucumbers and tomatoes?

Fleas are perfectly designed by nature to feast on anything containing blood. Like a shark in the water or a wolf in the woods, fleas are ideally equipped to do what they do, making them very difficult to defeat. The bodies of these tiny parasites are extremely hardy and well-suited for their job.

A flea has a very hard exoskeleton, which means the body is covered by a tough, tile-like plate called a sclerite. Because of these plates, fleas are almost impossible to squish. The exoskeletons of fleas are also waterproof of fleas are also waterproof and shock resistant, and therefore fleas are highly resistant to the sprays and chemicals used to kill them.

Little spines are attached to his plate. The spine the flea scurries through an animal’s fur in – search of grooming pet tries to pull a flea off through the hair coat, these spines will extend and stick to the fur like Velcro.

Fleas are some of the best jumpers in the natural world. A flea can jump seven inches, or 150 times its own length, either vertically or horizontally. An equivalent jump for a person would be 555 feet, the height of the Washington Monument. Fleas can jump 30,000 times in a row without stopping, and they are able to accelerate through the air at an incredibly high rate – a rate which is over ten times what humans can withstand in an airplane.

Fleas have very long rear legs with huge thigh muscles and multiple joints. When they get ready to jump. They fold their long legs up and crouch like a runner on a staring block. Several of their joints contain a protein called resilin, which helps catapult fleas into the air as they jump, similar to the way a rubber band provides momentum to a slingshot. Outward facing claws on the bottom of their legs grip anything they touch when they land.

The adult female flea mates after her first blood meal and begins producing eggs in just 1 to 2 days. One flea can lay up to 50 eggs in one day and over 2,000 in her lifetime. Flea eggs can be seen with the naked eye, but they are about the size of a grain of salt. Shortly after being laid, the eggs begin to transform into cocoons. In the cocoon state, fleas are fully developed adults, and will hatch immediately if conditions are favorable. Fleas can detect warmth, movement, and carbon dioxide in exhaled breath, and these three factors stimulate them to emerge as new adults. If the flea does not detect appropriate conditions, it can remain dormant in the cocoon state for extended periods. Under ideal conditions, the entire life cycle may only take 3 weeks, so in no time at all, pets and homes can become infested.

Because of these characteristics, fleas are intimidating opponents. The best way to control fleas, therefore, is to take steps to prevent an infestation from ever occurring.

According to the passage, which of the following statements is true?

Recent advances in science and technology have made it possible for geneticists to find out abnormalities in the unborn foetus and take remedial action to rectify some defects which would otherwise prove to be fatal to the child. Though genetic engineering is still at its infancy, scientists can now predict with greater accuracy a genetic disorder. It is not yet an exact science since they are not in a position to predict when exactly a genetic disorder will set in. While they have not yet been able to change the genetic order of the gene in germs, they are optimistic and are holding out that in the near future they might be successful in achieving this feat. They have, however, acquired the ability in manipulating tissue cells. However, genetic mis-information can sometimes be damaging for it may adversely affect people psychologically. Genetic information may lead to a tendency to brand some people as inferiors. Genetic information can therefore be abused and its application in deciding the sex of the foetus and its subsequent abortion is now hotly debated on ethical lines. But on this issue geneticists cannot be squarely blamed though this charge has often been leveled at them. It is mainly a societal problem. At present genetic engineering is a costly process of detecting disorders but scientists hope to reduce the costs when technology becomes more advanced. This is why much progress in this area has been possible in scientifically advanced and rich countries like the U.S.A., U.K. and Japan. It remains to be seen if in the future this science will lead to the development of a race of supermen or will be able to obliterate disease from this world.

What is the tone of the author in the last sentence of the passage?

Lilly loves her town. She loves the mall. She loves the parks. She also loves her school. Most of all, though, Lilly loves the seasons. In her old town, it was hot all of the time.

Sometimes it is cold in Lilly’s new town. The cold season is in winter. Once in a while it snows. Lilly has never seen snow before. So far her, the snow is exciting as well as very beautiful. Lilly has to wear gloves to keep her hands warm. She also wear a scarf around her neck.

In spring, flowers bloom and the trees turn green with new leaves. Pollen falls on the cars and windowsills and makes Lilly sneeze. People work in their yards and mow their grass.

In summer, Lilly wears her old shorts and sandals- the same ones she used to wear in her old town. It is hot outside, and dogs lie in the shade. Lilly and her friends go to a pool or play in the water sprinkler. Her father cooks hamburgers on the grill for dinner.

Lilly’s favorite season is autumn. In autumn, the leaves on the trees turn yellow, gold, red, and orange. Halloween comes in autumn, and this Lilly’s favorite holiday. Every Halloween, Lilly wears a costume. Last year she wore a mouse costume. This year she will wear a fish costume.

One evening in autumn, Lilly and her mom are on sitting together on the porch. Mom tells Lilly that autumn is also called “fall”. This is a good idea, Lilly thinks, because in the fall all of the leaves fall down from the trees.

Which of the following best describes the structure of this passage?

The history of literature really began was the earliest of the arts. Man danced for joy round his primitive camp fire after the defeat and slaughter of his enemy. He yelled and shouted as he danced and gradually the yells and shouts became coherent and caught the measure of the coherent and caught the measure of the dance and thus the first war song was sung. As the idea of God developed prayers were framed. The songs and prayers became traditional and were repeated from one generation to another, each generation adding something of its own. As man slowly grew more civilized, he was compelled to invent some method of writing by three urgent necessities. There were certain things that it was dangerous to forget and which, therefore, had to be recorded. It was often necessary to communicate with person who were some distance away and it was necessary to protect one’s property by making tools, cattle and so on, in some distinctive manner. So man taught himself to write and having learned to write purely for utilitarian reasons he used this new method for preserving his war songs and his prayers. Of course, among these ancient peoples, There were only a very few individuals who learned to write, and only a few could read what was written.

Before man invented writing

When her grandmother’s health began to deteriorate in the fall of 1994, Mary would make the drive from Washington, DC to Winchester every few days.

She hated highway driving, finding it ugly and monotonous. She preferred to take meandering back roads to her grandmother’s hospital. When she drove through the rocky town of Harpers Ferry, the beauty of the rough waters churning at the intersection of the Shenandoah and Potomac rivers always captivated her.

Toward the end of her journey, Mary had to get on highway 81. It was here that she discovered a surprising bit of beauty during one of her trips. Along the median of the highway, there was a long stretch of wildflowers. They were thin and delicate and purple, and swayed in the wind as if whispering poems to each other.

The first time she saw the flowers, Mary was seized by an uncontrollable urge to pull over on the highway and yank a bunch from the soil. She carried them into her grandmother’s room when she arrived at the hospital and placed them in a water pitcher by her bed. For a moment her grandmother seemed more lucid than usual. She thanked Mary for the flowers, commented on their beauty and asked where she had gotten them. Mary was overjoyed by the ability of the flowers to wake something up inside her ailing grandmother.

Afterwards, Mary began carrying scissors in the car during her trips to visit her grandmother. She would quickly glide onto the shoulder, jump out of the car, and clip a bunch of flowers. Each time Mary placed the flowers in the pitcher, her grandmother’s eyes would light up and they would have a splendid conversation.

One morning in late October, Mary got a call that her grandmother had taken a turn for the worse. Mary was in such a hurry to get to her grandmother that she sped past her flower spot. She decided to turn around head several miles back, and cut a bunch. Mary arrived at the hospital to find her grandmother very weak and unresponsive. She placed flowers in the pitcher and sat down. She felt a squeeze on her fingers. It was the last conversation they had.

As used in the beginning of the story, which is the best definition for ‘captivated’?

Yellowstone National Park is the U.S. States of Wyoming, Idaho and Montana. It became the first National Park in 1872. There are geysers and hot springs at Yellowstone. There are also many animals at Yellowstone. There are elk, bison, sheep, grizzly, black bears, moose, coyotes, and more.

More than 3 million people visit Yellowstone National Park year. During the winter, visitors can ski or go snowmobiling there. There are also snow coaches that give tours. Visitors can see steam (vapor water) come from the geysers. During other seasons, visitors can go boating or fishing. People can ride horses there. There are nature trails and tours. Most visitors want to see Old Faithful, a very predictable geyser at Yellowstone Visitors can check a schedule to see the exact time that Old Faithful is going to erupt. There are many other geysers and boiling springs in the area. Great Fountain Geyser erupts every 11 hours. Excelsior Geyser produces 4,000 gallons of boiling water each minute! Boiling water is 100 degrees Celsius, or 212 degrees Fahrenheit – that’s very hot! People also like to see the Grand Prismatic Spring. It is the largest hot spring in the park. It has many beautiful colors. The beautiful colors are caused by bacteria in the water. These are forms of life that have only one cell. Different bacteria live in different water temperatures. Visiting Yellowstone National Park can be a week – long vacation or more. It is beautiful and there are activities for everyone.

Steam is

On January 3, 1961, nine days after Christmas, Richard Legg, John Byrnes, and Richard McKinley were killed in a remote desert in eastern Idaho. Their deaths occurred when a nuclear reactor exploded at a top-secret base in the National Reactor Testing Station (NRTS). Official reports state that the explosion and subsequent reactor meltdown resulted from the improper retraction of the control rod. When questioned about the events that occurred there, officials were very reticent. The whole affair, in fact, was discussed much, and seemed to disappear with time.

In order to grasp the mysterious nature of the NRTS catastrophe, it help to know a bit about how nuclear reactors work. After all, the generation of nuclear energy may strike many as an esoteric process. However, given its relative simplicity, the way in which the NRTS reactor functions is widely comprehensible. In this particular kind of reactor, a cluster of nine-ton uranium fuel rods are positioned lengthwise around a central control rod. The reaction begins with the slow removal of the control ro, which starts a controlled nuclear reaction and begins to heat the water in the reactor. This heat generates steam, which builds pressure inside the tank. As pressure builds, the steam looks for a place to escape. The only place this steam is able to escape is through the turbine. As it passes through the turbine on its way out of the tank, it turns the giant fan blades and produces energy.

On the morning of January 3, after the machine had been shut down for the holidays, the three men arrived at the station to restart the reactor. The control rod needed to be pulled out only four inches to be reconnected to the automated driver. However, records indicate that Byrnes yanked it out 23 inches, over five times the distance necessary. In milliseconds the reactor exploded. Legg was impaled on the ceiling; he would be discovered last. It took one week and a lead-shielded crane to remove his body. Even in full protective gear, workers were only able to work a minute at a time. The three men are buried in lead-lined coffins under concrete in New York, Michigan, and Arlington Cemetery, Virginia.

The investigation took nearly two years to complete. Did Byrnes have a dark motive? Or was it simply an accident? Did he know how precarious the procedure was? Other operators were questioned as to whether they knew the consequences of pulling the control rod out so far. They responded “Of course! We often talked about what we would do if we were at a radar station and the Russians came.

“We’d yank it out.”

Official reports are oddly ambiguous, but what they do not explain, gossip does. Rumors had it that there was tension between the men because Byrnes suspected the other two of being involved with his young wife. There is little doubt than he, like the other operators, knew exactly what would happen when he yanked the control rod.

According to the paragraph 2, which of the following is directly responsible for energy production?

On January 3, 1961, nine days after Christmas, Richard Legg, John Byrnes, and Richard McKinley were killed in a remote desert in eastern Idaho. Their deaths occurred when a nuclear reactor exploded at a top-secret base in the National Reactor Testing Station (NRTS). Official reports state that the explosion and subsequent reactor meltdown resulted from the improper retraction of the control rod. When questioned about the events that occurred there, officials were very reticent. The whole affair, in fact, was discussed much, and seemed to disappear with time.

In order to grasp the mysterious nature of the NRTS catastrophe, it help to know a bit about how nuclear reactors work. After all, the generation of nuclear energy may strike many as an esoteric process. However, given its relative simplicity, the way in which the NRTS reactor functions is widely comprehensible. In this particular kind of reactor, a cluster of nine-ton uranium fuel rods are positioned lengthwise around a central control rod. The reaction begins with the slow removal of the control ro, which starts a controlled nuclear reaction and begins to heat the water in the reactor. This heat generates steam, which builds pressure inside the tank. As pressure builds, the steam looks for a place to escape. The only place this steam is able to escape is through the turbine. As it passes through the turbine on its way out of the tank, it turns the giant fan blades and produces energy.

On the morning of January 3, after the machine had been shut down for the holidays, the three men arrived at the station to restart the reactor. The control rod needed to be pulled out only four inches to be reconnected to the automated driver. However, records indicate that Byrnes yanked it out 23 inches, over five times the distance necessary. In milliseconds the reactor exploded. Legg was impaled on the ceiling; he would be discovered last. It took one week and a lead-shielded crane to remove his body. Even in full protective gear, workers were only able to work a minute at a time. The three men are buried in lead-lined coffins under concrete in New York, Michigan, and Arlington Cemetery, Virginia.

The investigation took nearly two years to complete. Did Byrnes have a dark motive? Or was it simply an accident? Did he know how precarious the procedure was? Other operators were questioned as to whether they knew the consequences of pulling the control rod out so far. They responded “Of course! We often talked about what we would do if we were at a radar station and the Russians came.

“We’d yank it out.”

Official reports are oddly ambiguous, but what they do not explain, gossip does. Rumors had it that there was tension between the men because Byrnes suspected the other two of being involved with his young wife. There is little doubt than he, like the other operators, knew exactly what would happen when he yanked the control rod.

The tone of the author can best be described as

Chocolate – there’s nothing quite like it, is there? Chocolate is simply delicious. What is chocolate? Where does it come from?

Christopher Columbus was probably the first to take cacao beans from the New World to Europe in around 1502. But the history of chocolate goes back at least 4,000 years! The Aztecs, who lived in America, through that their bitter cacao drink was a divine gift from heaven. In fact, the scientist Carolus Linnaeus named the plant Theobroma, which means “food of the gods”

The Spanish explorer Hernando Cortex went to America in 1519. He visited the Mexican emperor Montezuma. He saw that Montezuma drank cacao mixed with vanilla and spices. Cortez took some cacao home as a gift to the Spanish King Charles. In Spain, people began to drink Cortez’s chocolate in drink with chili peppers. However, the natural taste of cacao was too bitter for most people. To sweeten the drink, Europeans added sugar to the cacao drink. As a sweet drink, it became more popular. By the 17^th century, rich people in Europe were drinking it.

Later, people started using chocolate in pastries, like pies and cakes. In 1828, Dutch chocolate makers started using a new process for removing the fat from cacao beans, and getting to the center of the cacao bean. The Dutch chocolate maker Conrad J. Van Houten made a machine that pressed the fat from the bean. The resulting powder mixed better with water than cacao did. Now, some call van Houten’s chocolate “Dutch chocolate.”

It was easy to mix Dutuch chocolate powder with sugar. So other chocolate makers started trying new recipes that used powdered chocolate. People started mixing sweetened chocolate with cocoa butter to make solid chocolate bars. In 1849, an English chocolate maker made the first chocolate bar. In the 19^th century, the Swiss started making milk chocolate by mixing powdered milk with sweetened chocolate. Milk chocolate has not changed much since this process was invented.

Today, two countries – Brazil and Ivory Coast – account for almost half the world’s chocolate. The United States imports most of the chocolate in the world, but the Swiss eat the most chocolate per person. The most chocolate eaten today is sweet milk chocolate, but people also eat white chocolate and dark chocolate.

Cocoa and dark chocolate are believed to help prevent heart attacks, or help keep from happening. They are supposed to be good for the circulatory system. On the other hand, the high fat content of chocolate can cause weight gain, which is not good for people’s health. Other health claims for chocolate have not been proven, but some research shows that chocolate could be good for the brain.

Chocolate is a popular holiday gift. A popular Valentine’s Day gift is a box of chocolate candies with a card and flowers. Chocolate is sometimes given for Christmas and birthdays. Chocolate eggs are sometimes given at Easter.

Chocolate is toxic to some animals. An ingredient in chocolate is poisonous to dogs, cats, parrots, small rodents, and some livestock. Their bodies cannot process some if the chemicals found in chocolate. Therefore, they should never be fed chocolate.

Why did Linnaeus name the plant Theobroma?